Rigid Solar Panels

HQST Compact N-Type 200W

By Marcus Delgado · Updated June 21, 2026 · 200W · N-Type TOPCon

$149.99

See the full ranking
  • N-Type cells, ~25.4% output efficiency
  • ~13% smaller and ~14.5% lighter than a standard 200W panel
  • IP65 water- and dust-resistant junction box
  • Durable frame for RV, van, and off-grid use

We sell the products listed here directly. Prices and specifications are checked against the manufacturer and change frequently. How we review.

The HQST Compact N-Type 200W is a 200-watt n-type topcon option best suited to tight ground-mount footprints. 13% smaller footprint at 200W.

Overview

The HQST 200W N-Type is a high-efficiency panel built to be smaller and lighter than a conventional 200W module — about 13% more compact and 14.5% lighter — which matters when roof space and load budget are both tight.

It reaches roughly 25.4% output efficiency, carries an IP65-rated junction box against water and dust, and uses a durable frame suited to RVs, vans, and off-grid roofs.

Features & real-world use

Same power, smaller footprint

Same power, smaller footprint

About 13% smaller and 14.5% lighter than a standard 200W PERC panel at 20.17 lb, leaving more room for vents, skylights, and other roof accessories.

Next-generation N-Type cells

Next-generation N-Type cells

Up to 25.4% efficiency, a 30-year 87.4% output warranty, no initial LID loss, and better low-light performance than PERC.

Built for real outdoor use

Built for real outdoor use

16BB Grade A+ cells, an IP65 waterproof rating, an anti-corrosion aluminum frame, and four pre-drilled holes for easy mounting.

Hot-spot protection built in

Hot-spot protection built in

Bypass diodes route around a shaded or damaged cell, cutting heat buildup and the severe power drop that hits cheaper panels.

One panel instead of two

One panel instead of two

A single 200W panel replaces a pair of 100W modules — about 20% smaller, 17% lighter, 50% fewer mounts and cables, and a lower total system cost.

Invest once, power for decades

Invest once, power for decades

A 30-year performance warranty (87.4% output) and 5-year product warranty back the panel.

Built for any roof, deck, or vehicle

A compact, lightweight framed panel that mounts through four pre-drilled holes — small and light enough for a crowded roof, and rugged enough for fixed off-grid use.

RV & trailer roofs

Bolt through the pre-drilled holes onto a fiberglass or metal roof; its small footprint frees up space for vents and fans.

Vans & campers

About 14.5% lighter than a standard 200W panel, easing the load on a van roof.

Cabins & sheds

A durable framed array for an off-grid outbuilding, expandable over time.

Ground racks

Tilt-mount on a rack or A-frame for a homestead or seasonal setup.

Boats with rail mounts

Clamps to rails or an arch where the frame is well supported.

Carports & patio covers

Bolt to a carport or pergola for a fixed, weatherproof array.

Key features

Specifications

BrandHQST
CategoryRigid Solar Panels
Power output200 W
Cell technologyN-Type TOPCon
Efficiency25.4%
Weight18.0 lbs
Price$119.99
Best forTight ground-mount footprints
Max power (STC)200W
Cell efficiencyup to 25.4%
Open-circuit voltage (Voc)22.4V
Short-circuit current (Isc)11.04A
Optimum operating voltage (Vmp)19.2V
Optimum operating current (Imp)10.50A
Max system voltage600V DC
Max series fuse rating20A
Junction boxIP65
Weight20.17 lbs
Dimensions30.1 × 46.3 × 1.18 in

Roof-load fit for manufactured homes

Rigid glass-and-aluminum modules add roughly 3.3–4 psf installed. On a manufactured roof (often only 10–15 psf dead-load capacity) this is best mounted on a ground rack, carport, or accessory structure rather than the home's roof.

How a rigid module's weight stacks up against lightweight flexible panels — the key roof-load factor:

Pros & cons

👍 Pros

  • High efficiency (25.4%) packs more watts into limited roof space
  • Premium N-Type/TOPCon cells with better low-light and heat performance
  • Budget-friendly price

👎 Cons

  • Heavy rigid glass — concentrates point-loads; not ideal for a manufactured roof

Is the HQST Compact N-Type 200W right for your mobile home?

Choose this panel if your priority is tight ground-mount footprints. As a rigid module, it delivers the most watts per dollar when mounted on a ground rack, carport, or accessory structure rather than the home's thin roof deck. For full sizing math, HUD roof-load zones, and permitting requirements, read our complete buyer's guide.

Reviews

No reviews yet. Bought this panel? Be the first to review it — your experience helps other mobile-home owners choose.

Write a review

Reviews are checked before publishing. We never edit the wording of a genuine review.

More rigid solar panels

Rigid Solar Panels

WindyNation 100W Poly

Coming soon
  • Polycrystalline
  • 100W output
  • 17.6 lbs

Cost-effective polycrystalline panel

Details Coming soon
Rigid Solar Panels

RICH SOLAR 100W Poly

Coming soon
  • Polycrystalline
  • 100W output
  • 16.5 lbs

Reliable budget poly panel

Details Coming soon
Rigid Solar Panels

Rich Solar ONYX MEGA 200W

Coming soon
  • Monocrystalline
  • 200W output
  • ~20% efficiency
  • 24.0 lbs

Robust heavy-duty frame construction

Details Coming soon

Browse all solar panels →