The Rich Solar 200W Kit is a 200-watt monocrystalline (2×100w) option best suited to budget off-grid sheds, small cabins. 20A MPPT at a budget price.
Overview
The Rich Solar 200W Slim Kit is a compact two-panel package built around the MEGA 100W SLIM Onyx modules, bundled with an MPPT controller and all the cabling and brackets needed to wire a 12V system.
The Bravo 30A MPPT controller extracts more from the array than a basic PWM unit, and the kit's inline fuse and pre-cut cable sets make it a clean starting point for a small off-grid or RV build.
Features & real-world use
A complete 200W 12V kit
Two MEGA 100W SLIM Onyx panels, a 30A MPPT controller, cabling, brackets, and an inline fuse — everything to wire a 12V system except the battery and inverter.
How the kit wires together
The panels feed the MPPT controller, which charges your battery; add an inverter for AC. This diagram shows each connection (battery and inverter sold separately).
How a solar kit works
Panel to controller to battery to inverter to your appliances — the basic off-grid power path at a glance.
Built for any roof, deck, or vehicle
The SLIM Onyx panels are low-profile framed modules, and the kit includes Z-brackets to bolt them to a roof — a clean start for a 12V RV or off-grid build.
RV & trailer roofs
The included Z-brackets bolt the slim framed panels to a fiberglass or metal roof.
Vans & campers
Low-profile panels for a high-top or pop-top roof, wired to the house battery through the MPPT controller.
Cabins & sheds
A durable two-panel array for a small off-grid outbuilding.
Ground racks
Tilt-mount on a rack or A-frame for a seasonal or homestead setup.
Boats with rail mounts
Framed panels clamp to rails or an arch where their weight is well supported.
Carports & patio covers
Bolt to a carport or pergola for a fixed, weatherproof array.
What's in the box
- 2 × MEGA 100W SLIM Onyx monocrystalline panels (RS-M100SLB)
- 1 × Bravo 30A MPPT charge controller (RS-MPPT30PB)
- 1 × 30 ft 10AWG solar cable set (panel to controller)
- 2 × 10 ft 10-gauge battery cables (red + black)
- 1 × Z-bracket mounting set
- 1 × 10A inline fuse holder
Specifications
| Brand | Rich Solar |
|---|---|
| Category | DIY Solar Kits |
| Power output | 200 W |
| Cell technology | Monocrystalline (2×100W) |
| Price | $269.00 |
| Best for | Budget off-grid sheds, small cabins |
| Charge Controller | 20A MPPT |
| Inverter | Not included |
Roof-load fit for manufactured homes
Rigid glass-and-aluminum modules add roughly 3.3–4 psf installed. On a manufactured roof (often only 10–15 psf dead-load capacity) this is best mounted on a ground rack, carport, or accessory structure rather than the home's roof.
Charge-controller type decides how much of your panels' output actually reaches the battery:
Pros & cons
👍 Pros
- Includes an efficient MPPT charge controller (95–98% vs ~75% PWM)
- 20A MPPT at a budget price
👎 Cons
- Heavy rigid glass — concentrates point-loads; not ideal for a manufactured roof
Is the Rich Solar 200W Kit right for your mobile home?
Choose this panel if your priority is budget off-grid sheds, small cabins. As a rigid module, it delivers the most watts per dollar when mounted on a ground rack, carport, or accessory structure rather than the home's thin roof deck. For full sizing math, HUD roof-load zones, and permitting requirements, read our complete buyer's guide.
Reviews
No reviews yet. Bought this panel? Be the first to review it — your experience helps other mobile-home owners choose.
