The BougeRV 400W Flexible Kit is a 400-watt monocrystalline (semi-flexible) option best suited to high capacity semi-flexible array. 400W semi-flexible for curved roofs.
Overview
The BougeRV 400W Arch 2.0 kit bundles high-efficiency fiberglass flexible panels with a smart MPPT controller and LiFePO4 storage, giving RVs, overlanders, and cabins a drop-in off-grid system rather than a loose set of parts.
A 2,000W pure sine wave inverter supplies clean power for fridges, fans, and everyday electronics, and the curved Arch 2.0 panels conform to rounded roofs — useful where a rigid module can't sit flat.
Features & real-world use
A 1-on-1 solar solution
Panel, controller, LiFePO4 battery, and inverter are matched to work together, so the array runs your appliances without sourcing parts separately.
Built for any roof, deck, or vehicle
The Arch 2.0's fiberglass panels bend to follow a curved roof, so this complete system mounts low-profile where a rigid array can't — with the controller, two batteries, and inverter making it a plug-and-play off-grid setup.
RV & trailer roofs
The curved Arch 2.0 panels follow the crown of a fiberglass or aluminum roof and sit nearly flush.
Camper vans & conversions
Low-profile and light for a high-top or pop-top roof, with the power system inside.
Boats & marine decks
Bend to a cabin top or deck and stand up to sun and spray.
Overland & trailers
Slim enough to keep a low profile on a moving rig and tough enough for trail vibration.
Mobile & manufactured homes
Light panels stay within a thin HUD-code roof's dead-load budget while two LiFePO4 batteries run real loads.
Cabins, sheds & tiny homes
A complete off-grid system for an outbuilding, with 2,000W of AC on tap.
What's in the box
- 2 × 200W Arch 2.0 fiberglass flexible solar panels
- 1 × MPPT solar charge controller
- 2 × 12V 100Ah LiFePO4 batteries
- 1 × 2,000W 12V pure sine wave inverter
Specifications
| Brand | BougeRV |
|---|---|
| Category | DIY Solar Kits |
| Power output | 400 W |
| Cell technology | Monocrystalline (semi-flexible) |
| Price | $1,189.99 |
| Best for | High capacity semi-flexible array |
| Charge Controller | Included |
| Inverter | Not included |
Roof-load fit for manufactured homes
Semi-flexible panels add roughly 0.5–1 psf and mount low-profile, well within the 10–15 psf dead-load budget of most manufactured roofs.
Charge-controller type decides how much of your panels' output actually reaches the battery:
Pros & cons
👍 Pros
- Lightweight semi-flexible build conforms to curved roofs
- 400W semi-flexible for curved roofs
👎 Cons
- Verify roof load capacity and mounting before installation
Is the BougeRV 400W Flexible Kit right for your mobile home?
Choose this panel if your priority is high capacity semi-flexible array. Because it is a flexible, low-profile panel, it can usually go straight onto a manufactured roof without exceeding the 10–15 psf dead-load limit. For full sizing math, HUD roof-load zones, and permitting requirements, read our complete buyer's guide.
Reviews
No reviews yet. Bought this panel? Be the first to review it — your experience helps other mobile-home owners choose.
