Rigid Solar Panels

HQST Compact Bifacial 200W

By Marcus Delgado · Updated June 21, 2026 · 200W · N-Type Monocrystalline (bifacial)

$162.49

See the full ranking
  • Bifacial N-Type cells capture reflected light on the back face
  • ~25.4% cell efficiency
  • About 13% more compact than a standard 200W panel
  • All-black design for a cleaner rooftop appearance

We sell the products listed here directly. Prices and specifications are checked against the manufacturer and change frequently. How we review.

The HQST Compact Bifacial 200W is a 200-watt n-type monocrystalline (bifacial) option best suited to ground mounts and accessory roofs. Dual-sided capture, up to 30% rear gain.

Overview

The HQST Compact Bifacial 200W is an all-black N-Type panel roughly 13% smaller than a conventional 200W module, with a rear face that harvests reflected light for extra yield over bright surfaces.

At about 25.4% cell efficiency it packs more output into less roof area — useful on a crowded RV or manufactured-home roof where every square foot is spoken for.

Features & real-world use

Generates power from both sides

Generates power from both sides

The bifacial cells harvest reflected light off the surface below — up to 30% extra output over a bright roof, concrete, or sand.

One panel instead of two

One panel instead of two

A single compact 200W panel replaces a pair of 100W modules — about 18% smaller, 26% lighter, with 50% fewer mounts and cables and a lower total system cost.

Next-gen N-Type cells

Next-gen N-Type cells

Up to 25.4% cell efficiency, a 30-year 87.4% output warranty, a low -0.29%/°C temperature coefficient, and better low-light performance than standard PERC.

Hot-spot protection built in

Hot-spot protection built in

Bypass diodes automatically route around a shaded or damaged cell, reducing heat buildup and the power loss that plagues cheaper panels.

Built for real outdoor use

Built for real outdoor use

A corrosion-resistant black aluminum frame, IP68 waterproof rating, 16BB Grade A+ cells, and four pre-drilled mounting holes.

Invest once, power for decades

Invest once, power for decades

A 30-year performance warranty (87.4% output) and 5-year product warranty back the panel.

Built for any roof, deck, or vehicle

The compact bifacial panel is a framed glass module whose rear face harvests reflected light, so it does best on a rack, metal roof, or bright surface — mounted through its four pre-drilled holes, not adhered flat.

RV & trailer roofs

Bolt through the four pre-drilled holes onto a fiberglass or metal roof; a light roof reflects extra light onto the rear face.

Ground racks & arrays

Tilt-mounted over gravel, concrete, or grass, the bifacial back face adds free reflected yield.

Metal & standing-seam roofs

A bright metal roof bounces light onto the rear cells — an ideal home for a bifacial module.

Vans & campers

Compact and lighter than two 100W panels, so it fits a crowded van roof with fewer mounts.

Cabins & outbuildings

A durable framed array for an off-grid shed or cabin, expandable over time.

Boats with rail mounts

The framed panel clamps to rails or an arch where its weight is well supported.

Key features

Specifications

BrandHQST
CategoryRigid Solar Panels
Power output200 W
Cell technologyN-Type Monocrystalline (bifacial)
Efficiency25.4%
Weight18.0 lbs
Price$125.99
Best forGround mounts and accessory roofs

Roof-load fit for manufactured homes

Rigid glass-and-aluminum modules add roughly 3.3–4 psf installed. On a manufactured roof (often only 10–15 psf dead-load capacity) this is best mounted on a ground rack, carport, or accessory structure rather than the home's roof.

How a rigid module's weight stacks up against lightweight flexible panels — the key roof-load factor:

Pros & cons

👍 Pros

  • High efficiency (25.4%) packs more watts into limited roof space
  • Premium N-Type/TOPCon cells with better low-light and heat performance
  • Bifacial — captures reflected light off the back for bonus output

👎 Cons

  • Heavy rigid glass — concentrates point-loads; not ideal for a manufactured roof

Is the HQST Compact Bifacial 200W right for your mobile home?

Choose this panel if your priority is ground mounts and accessory roofs. As a rigid module, it delivers the most watts per dollar when mounted on a ground rack, carport, or accessory structure rather than the home's thin roof deck. For full sizing math, HUD roof-load zones, and permitting requirements, read our complete buyer's guide.

Reviews

No reviews yet. Bought this panel? Be the first to review it — your experience helps other mobile-home owners choose.

Write a review

Reviews are checked before publishing. We never edit the wording of a genuine review.

More rigid solar panels

Rigid Solar Panels

WindyNation 100W Poly

Coming soon
  • Polycrystalline
  • 100W output
  • 17.6 lbs

Cost-effective polycrystalline panel

Details Coming soon
Rigid Solar Panels

RICH SOLAR 100W Poly

Coming soon
  • Polycrystalline
  • 100W output
  • 16.5 lbs

Reliable budget poly panel

Details Coming soon

Browse all solar panels →