The BougeRV Yuma 200W CIGS Flexible Panel is a 200-watt cigs thin-film option best suited to mobile-home roofs with strict weight limits. 360° bendable, drill-free adhesive, IP68.
Overview
The BougeRV Yuma 200W CIGS is a thin-film flexible panel that bends up to 360° to fit almost any surface, weighing just 8.44 lbs — a fraction of a comparable glass panel.
CIGS thin-film tolerates heat and partial shade better than crystalline silicon, and this panel is rated for 2400Pa wind and 5400Pa snow loading, so it holds up to real weather on a moving or exposed roof.
Built for any roof, deck, or vehicle
At twice the wattage of the 100W but the same thin, bendable build, the 200W CIGS covers a bigger roof or deck while still bonding without brackets — so it reaches the same range of surfaces a rigid module can't.
RV & trailer roofs
Bonds flush to fiberglass, aluminum, or rubber roofs and follows their crown, adding real wattage without a rack or roof penetrations.
Camper vans & conversions
Low-profile and light for a high-top or pop-top roof, with a shape that works around vents and fans.
Boats & marine decks
Sealed to IP68 and rated to 2400Pa wind / 5400Pa snow, so it holds up to a wet, exposed deck.
Airstreams & curved rigs
The 360° flex wraps the tight radius of a polished trailer or teardrop where rigid panels can't sit.
Rooftop tents & overland
Sticks to a tent shell or hard case and shrugs off trail vibration and dust.
Mobile & manufactured homes
Stays within a thin HUD-code roof's dead-load budget while doubling the output of a single 100W panel.
Cabins, sheds & tiny homes
A drill-free way to power an off-grid outbuilding without framing a rigid array.
Key features
- CIGS thin-film cells — better heat and partial-shade tolerance than crystalline silicon
- Bends up to 360° to conform to curved or irregular surfaces
- Ultra-light at 8.44 lbs — minimal added roof load
- Rated to 2400Pa wind and 5400Pa snow load
Specifications
| Brand | BougeRV |
|---|---|
| Category | Flexible & CIGS Panels |
| Power output | 200 W |
| Cell technology | CIGS Thin-Film |
| Efficiency | 17.0% |
| Weight | 8.44 lbs |
| Price | $479.99 |
| Best for | Mobile-home roofs with strict weight limits |
| Voc | 30.4V |
| Isc | 9.48A |
| Dimensions | 82.2 × 26.0 × 0.06 in |
| Operating Temp | -40°F to +185°F |
| Warranty | 10-yr workmanship / 25-yr power |
Roof-load fit for manufactured homes
CIGS thin-film adds under 0.5 psf and bonds flat to the deck — no point loads, safe across all HUD roof-load zones (South, Middle, North).
Where this panel's efficiency lands among portable, flexible, and rigid options:
Pros & cons
👍 Pros
- Flexible CIGS thin-film — drill-free, zero point-load on the roof
- 360° bendable, drill-free adhesive, IP68
👎 Cons
- Lower peak efficiency than premium rigid mono — needs more area per watt
Is the BougeRV Yuma 200W CIGS Flexible Panel right for your mobile home?
Choose this panel if your priority is mobile-home roofs with strict weight limits. Because it is a flexible, low-profile panel, it can usually go straight onto a manufactured roof without exceeding the 10–15 psf dead-load limit. For full sizing math, HUD roof-load zones, and permitting requirements, read our complete buyer's guide.
Reviews
No reviews yet. Bought this panel? Be the first to review it — your experience helps other mobile-home owners choose.
