The BougeRV 200W Rigid Kit is a 200-watt monocrystalline option best suited to standard rigid mobile home setup. Conventional rigid 200W package.
Overview
The BougeRV 200W TOPCon rigid kit is built on a single 16BB N-Type bifacial panel that harvests reflected light from its back face, plus a Sunflow 30A MPPT controller, a 12V 100Ah LiFePO4 battery, and a 1,000W pure sine wave inverter.
As a glass-and-aluminum module it delivers strong watts-per-dollar on a ground rack, carport, or accessory structure, where its weight is not a concern for the roof beneath it.
Features & real-world use
16-busbar N-Type cells
The 16BB N-Type TOPCon layout moves more current with less resistive loss, for higher output and a longer service life.
N-Type TOPCon performance
Up to ~25% efficiency, up to 80% bifacial gain, a low -0.32%/°C temperature coefficient, and a 30-year power warranty.
26% smaller, same power
The panel packs 200W into roughly a quarter less area than a conventional module — valuable where roof or rack space is tight.
Bifacial gain from reflected light
The rear face harvests light bouncing off the surface below — up to 80% extra over a bright roof or ground.
Wires 12V and 24V systems
One N-type panel does the job of two P-type panels in a 24V build, saving space and cost.
Keeps working in partial shade
Even shaded and in motion, the N-type panel keeps a larger working area producing than a standard panel.
All-black, premium look
A black corrosion-resistant frame and all-black cells blend into a dark roof for a clean, finished appearance.
Built for any roof, deck, or vehicle
This is a heavier glass-and-aluminum bifacial panel, so it's happiest on a rack, carport, or metal roof where its back face can catch reflected light — not adhered to a thin roof deck.
Ground racks & arrays
Tilt-mounted over gravel or a light-colored surface, the bifacial rear face adds free reflected yield.
Carports & patio covers
A rigid frame bolts to a carport or pergola and shrugs off wind and snow load.
Metal & standing-seam roofs
A bright metal roof reflects light onto the panel's rear face — an ideal home for a bifacial module on a proper rack.
RV & trailer roofs (racked)
Mount to a roof rack or spacers, not flat, so the frame clears the roof and the back face still sees light.
Cabins & outbuildings
Rack-mounted on a shed or cabin roof for a durable, expandable off-grid array.
Boats with rail mounts
The framed panel clamps to a rail or arch where its weight is well supported.
What's in the box
- 1 × 16BB N-Type 200W bifacial rigid solar panel
- 1 × Sunflow 30A MPPT charge controller (12V/24V)
- 1 × 12V 100Ah LiFePO4 battery
- 1 × 1,000W 12V pure sine wave inverter
Specifications
| Brand | BougeRV |
|---|---|
| Category | DIY Solar Kits |
| Power output | 200 W |
| Cell technology | Monocrystalline |
| Price | $719.99 |
| Best for | Standard rigid mobile home setup |
| Charge Controller | Included |
| Inverter | Not included |
Roof-load fit for manufactured homes
Rigid glass-and-aluminum modules add roughly 3.3–4 psf installed. On a manufactured roof (often only 10–15 psf dead-load capacity) this is best mounted on a ground rack, carport, or accessory structure rather than the home's roof.
Charge-controller type decides how much of your panels' output actually reaches the battery:
Pros & cons
👍 Pros
- Conventional rigid 200W package
👎 Cons
- Heavy rigid glass — concentrates point-loads; not ideal for a manufactured roof
Is the BougeRV 200W Rigid Kit right for your mobile home?
Choose this panel if your priority is standard rigid mobile home setup. As a rigid module, it delivers the most watts per dollar when mounted on a ground rack, carport, or accessory structure rather than the home's thin roof deck. For full sizing math, HUD roof-load zones, and permitting requirements, read our complete buyer's guide.
Reviews
No reviews yet. Bought this panel? Be the first to review it — your experience helps other mobile-home owners choose.
